Kasco3.1JF Floating Fountain, 3 HP Decorative Fountain

This is a very powerful pond fountain, recommended for aerating 1.5-2 acre ponds. Operates in as little as 24 inches of water. This is the 208-240-volt model; 3-phase model also available. Assembled in USA. Very large droplets and displays. This is a powerful floating fountain. 5 Fountain Displays Included! Nozzles change in a mere 30 seconds. 5-Year Warranty.

Kasco J series, decorative fountains set themselves apart from other manufacturers with their great balance of laminar displays and lots of aeration. The fountains do not go as high because of their large nozzle holes but as a result do an immense amount of aeration and are much less likely to clog. Please see our closeup on a nozzle pic so you can see how big the nozzle holes are. The bigger the hole, the lower the height, but the more aeration! Installation and assembly is easy, though we do recommend an electrician set up the 208-240 volt control panel. Super simple to add lights. Each kits comes with five nozzles (as pictured) and you can also add one of the magnificent premium nozzles for a low price.  Great reliability when you buy Kasco products, and the motors are repairable at the factory, too.

Package Includes:

• Motor unit
• Float
• Bottom screen
• Interchangeable nozzles
• Control panel with GFI protection and two timers
• Mooring lines
• Power cord
• Operates at a low 13.4 operating amps, 208-240v
• Available also in 3-phase models
• Only 24 inches minimum depth required

For ponds with a great deal of muck, you might want to add Kasco Macrozyme, a beneficial bacteria which is non-toxic to humans, fish and other animals, and releases billions of beneficial bacteria and enzymes to reduce muck build-up, neutralize odors, and clarify your water. One 8-oz bag treats about 1/2 acre feet of water.

Don’t forget to check out our pond size calculator here.

If you order one of the Premium Nozzles, pattern dimensions listed below.